New Life Games LLC

Bill Validators, Currency Acceptors and Printers => Printers - ALL => Topic started by: jakah440 on October 31, 2022, 02:49:11 PM

Title: Aristocrat MK7 printer
Post by: jakah440 on October 31, 2022, 02:49:11 PM

Working on getting a TITO setup working on my MK7. I have been successful in getting it to accept tickets thanks to Justin Kalis's instructions but the printer is not printing.  It shows up in the machine identification but i thing it has the wrong firmware.  It is showing 3RUSAAW01. what i can find online is for Aristocrat in a Gen3 Futurelogic is that it should be 3RUSAA703.

Anybody know if that is correct and if so could i flash the firmware?  What's needed? or is there someone that can do this?

Thanks in advance for the help.

Justin

Title: Re: Aristocrat MK7 printer
Post by: jakah440 on November 04, 2022, 03:07:11 PM

Anybody help on this one?

Thanks, Justin

Title: Re: Aristocrat MK7 printer
Post by: Slotman on November 05, 2022, 08:03:05 AM

If you can go in to your machine and print a demo ticket you are good with the firmware.
If it shows up in the machine odds are its communicating and is compatible.

If you can print a demo ticket you need to start looking toward your payout settings (im not familiar with MK7 machines)
The TITO doesnt care what type of firmware you have, the machine does and by a demo ticket that proves everything you need.

Title: Re: Aristocrat MK7 printer
Post by: jakah440 on November 05, 2022, 09:17:19 AM

Thank you. Yeah it will not print a ticket from the machine. I did get it to print a ticket out by pushing a button on the printer. It shows a firmware from what I found to se for an ainsworths machine.

Title: Re: Aristocrat MK7 printer
Post by: jakah440 on November 07, 2022, 10:08:38 AM

Here is the printout from the printer i have.
Shows firmware from an Ainsworth.

Looks like i need 3RUSAA703.

Anybody able to re-flash this for me?
thanks, Justin

Manufacturer Name                                   ID Number                                Printer

AGS                                                           GRUSA4100                               Gen 2
AGS                                                           GURUSA211                              Gen 2 Universal
AINSWORTH GAMING TEC                         GRUSA5009                               Gen 2
AINSWORTH GAMING TEC                         GURUSAAW6                              Gen 2 Universal
AINSWORTH GAMING TEC                         3RUSAAW01                              Gen 3
ARISTOCRAT(MK6)                                    GRUMK6004                              Gen 2 Universal
ARISTOCRAT(MK6/MK7)                            GRUSA5015                                Gen 2
ARISTOCRAT(MK7)                                    GUR001AI2                               Gen 2 Universal
ARISTOCRAT(MK7)                                    3RUSAA703                               Gen 3

Title: Re: Aristocrat MK7 printer
Post by: The laneman on November 07, 2022, 04:36:26 PM

I could never get a Gen 3 to work in a MK7 machine.
I always use a Gen2 or gen2 universal.

Title: Re: Aristocrat MK7 printer
Post by: jakah440 on November 07, 2022, 06:15:49 PM

Might be best to put out a WTB for a new printer with the firmware on it.

Thanks for the info!!

Justin

Title: Re: Aristocrat MK7 printer
Post by: Eddiie on January 23, 2023, 04:57:24 PM

Hmmm that baud rate says 9600, whereas the other one's I've seen on this board has been 19200. 
?