New Life Games LLC
Arcade Games, Pinball, Crane Games, Redemption Games and Other Stuff => Other Arcade and Amusement Games => Topic started by: T0X1K on November 07, 2018, 08:43:30 PM
-
Hi guys, been trying to get a JVL Concorde 1 up and running.
First thing I did was check the voltage on the CMOS battery which was 0.00v so I changed it.
Rebooted and held down the video reset button and the display came to life. I set up the CMOS and rebooted again but it just states the CMOS battery is low then tells me to press F1 which takes me back to CMOS.
It still keeps the date and time so I'm not sure what the problem is.
The RAM seem to be fine but I do notice that when I power up just before the display shows up I hear an alarm sound?
I'm not sure what I'm missing here. Any help would be appreciated!