New Life Games LLC
**Reel Slots** Gaming Machines => Bally Reel Games => Topic started by: busabrent on November 02, 2021, 02:31:16 PM
-
:wave:
I am slowly learning this machine but i haven't been able to track down what causes the cash box to cycle the part that pushes the bill down? keeps going up and down i am unable to post the video because the file size is over 1MB, the bill acceptor is also not accepting bills but seems to be working
also where do you guys buy parts from? i don't have enough rep to posted to the classifieds
-
Most likely the BV head is bad. But remove the head, open the top of the head and clean the optics with a cloth dampened with water only. You can look thru the classifieds here and on Ebay search JCM DBV DBV200 or a DBV145 will work. EPROM based heads can be updated to use the new $20
-
I did clean the head, I noticed some rust on the board I think i will replace the whole thing.
I will search the classifieds again thank you
also MODS* Samron Slots Link on the homepage goes to a porn site
-
Most likely the BV head is bad. But remove the head, open the top of the head and clean the optics with a cloth dampened with water only. You can look thru the classifieds here and on Ebay search JCM DBV DBV200 or a DBV145 will work. EPROM based heads can be updated to use the new $20
I tried with ebay but the seller told me this machine takes western money? that i cant get a jcm to work with it?
-
Also check broken wires at the transport wires at the Molex on the right side of the head
-
dont have a key for the top of the box, i will see if i can somehow remove that lock. will check wires tonight
-
The transport plugs into the head on the right side. Check the wires there. I sent you a PM
-
Wires look good, i'm thinking the unit is bad, looks like it got wet. will wait for replacement and go from there
-
There are 3 "U" shaped optics on the transport.
The one in the very back detects the transport platform movement.
If that optic is bad or weak platform movement is not detected and it keeps seeking, up and down, up and down.
Replacing that optic with a "fresh" one usually solved the seeking problem.
Try cleaning it, maybe some water scum is blocking the optic eye.
-
I will give that a shot, as soon as i figure out how to get this lock off
-
There are 3 "U" shaped optics on the transport.
The one in the very back detects the transport platform movement.
If that optic is bad or weak platform movement is not detected and it keeps seeking, up and down, up and down.
Replacing that optic with a "fresh" one usually solved the seeking problem.
Try cleaning it, maybe some water scum is blocking the optic eye.
was able to pry the box open without destroying anything, little dusty cleaned sensors still cycling. there is some rust on the head i have a working one on the way, if that doesn't work ill replace the transport
-
Your inbox is full. Trying to PM you. Tim
-
I am looking to replace or fix my DBV-145-SG with DBV 200 Does anyone know where I can buy one or how to get my old one to work? It lights up all red stays red. Everything else works fine. I had to reset ram and was wondering if I need to reset bill indicator?
-
NLG member Jim with Mid West Slots may have a DBV-200