New Life Games LLC
General NLG Chat => General Chat, Slot Shop **Tech Talk** Welcome wagon and other stuff. (Off-Topic Post Welcome) => Topic started by: TheChad on September 23, 2014, 08:02:38 AM
-
Hey all,
Does anyone have a molex crimper? I need a 4-pin y-harness made for my S2000, I was just going to buy the components and make the harness, but the molex pins have to be crimped and I don't want to buy the expensive crimper for 1 use.
If anyone has one and would be willing to make a cable for me, please post or PM me and let me know how much and I will give you more specific info on the cable I need!
Thanks!
-TheChad
-
I use this "universal" one for all my molex connectors. never had an issue with bad crimps.
http://www.mouser.com/ProductDetail/Molex/63811-1000/?qs=sGAEpiMZZMtVoztFdqDXO9VatCH9%252bhUh (http://www.mouser.com/ProductDetail/Molex/63811-1000/?qs=sGAEpiMZZMtVoztFdqDXO9VatCH9%252bhUh)
-
I use this "universal" one for all my molex connectors. never had an issue with bad crimps.
[url]http://www.mouser.com/ProductDetail/Molex/63811-1000/?qs=sGAEpiMZZMtVoztFdqDXO9VatCH9%252bhUh[/url] ([url]http://www.mouser.com/ProductDetail/Molex/63811-1000/?qs=sGAEpiMZZMtVoztFdqDXO9VatCH9%252bhUh[/url])
Yeah, I'm not really looking to spend $45 for a crimper I will likely never use again!
Could you make the Y adaptor for me? Obviously I would pay you.
Thanks,
-TheChad
-
Is this what you are looking for? Netplex, Amp from power supply?
-
I use this "universal" one for all my molex connectors. never had an issue with bad crimps.
[url]http://www.mouser.com/ProductDetail/Molex/63811-1000/?qs=sGAEpiMZZMtVoztFdqDXO9VatCH9%252bhUh[/url] ([url]http://www.mouser.com/ProductDetail/Molex/63811-1000/?qs=sGAEpiMZZMtVoztFdqDXO9VatCH9%252bhUh[/url])
Yeah, I'm not really looking to spend $45 for a crimper I will likely never use again!
Could you make the Y adaptor for me? Obviously I would pay you.
Thanks,
-TheChad
you need to show me what you need.
-
I use this "universal" one for all my molex connectors. never had an issue with bad crimps.
[url]http://www.mouser.com/ProductDetail/Molex/63811-1000/?qs=sGAEpiMZZMtVoztFdqDXO9VatCH9%252bhUh[/url] ([url]http://www.mouser.com/ProductDetail/Molex/63811-1000/?qs=sGAEpiMZZMtVoztFdqDXO9VatCH9%252bhUh[/url])
Yeah, I'm not really looking to spend $45 for a crimper I will likely never use again!
Could you make the Y adaptor for me? Obviously I would pay you.
Thanks,
-TheChad
you need to show me what you need.
Okay, I am definitely NOT an artist! But hopefully the picture will be good enough to show what I need..
Basically, it's the 4-pin cable that plugs into the BV, I need a Y adaptor that goes from 4-pin male to 4-pin female and taps the two outside wires from the 4-pin, the 2 outside wires I just need bare as I will solder them to the power wires that power my lighted sticker.
It comes with a tap for using the bulb socket on the BV, but mine doesn't have bulb socket(s), so I need to tap the harness.. Sure there are other ways of accomplishing this, but I like to do it clean and proper.
I am going to be placing an order at Mouser for some other stuff, I can order the components.
-TheChad
-
Why don't you just get wiretaps to tap into them, rather than go through making the harness? Easy and clean looking.
-
Why don't you just get wiretaps to tap into them, rather than go through making the harness? Easy and clean looking.
Wire taps are sloppy often are a cause of loose connections and I want to do it the right way.
-TheChad
-
ok, I'll make the cable for you. Are you supplying the parts or am I?
-
ok, I'll make the cable for you. Are you supplying the parts or am I?
If you have the parts I'll pay ya for them, if you'd have to order them, I'll just order them with the order I have for some other stuff and send them to you..
Do you have wire?
Thanks!
-TheChad
-
I think I have all the parts. I'll check on it tonight and let you know. I definitely have wire. How long do you want it?
-
I think I have all the parts. I'll check on it tonight and let you know. I definitely have wire. How long do you want it?
It only needs to be a couple of inches long, with the 2 taps maybe 4" long.
Thanks!
-TheChad
-
Ok, so this is the harness that goes to the LED board behind the "insert bills" yellow bezel on an S2000 right?
-
Ok, so this is the harness that goes to the LED board behind the "insert bills" yellow bezel on an S2000 right?
Yep!
-
This is a very informative post for a 10.00 part. After seeing what you actually need now don't see a problem with someone chiming in as this stuff is a dime a dozen and laying in dumpsters in many areas-still in machines etc. (not here) s-2000 are dinousars in my area as they prefer the bling bling games in their casinos. Easy fix but if you want it made no problem. I am not digging for it because at this time it would take to long but if it were out I would offer what you want.
-
Ok, so this is the harness that goes to the LED board behind the "insert bills" yellow bezel on an S2000 right?
Yep!
Ok, I have the parts necessary for it. Make a donation to the site and pm me your address and I'll make it up and send it your way.
-
Ok, so this is the harness that goes to the LED board behind the "insert bills" yellow bezel on an S2000 right?
Yep!
Ok, I have the parts necessary for it. Make a donation to the site and pm me your address and I'll make it up and send it your way.
You rock!
Donation Made!
PayPal transaction number15A25040B7306253C
PM Inbound!
Thanks again!
-TheChad
-
Here it is, on the way to you tomorrow.
-
Here it is, on the way to you tomorrow.
Got it!
Thanks soo much!
Should work perfect!!
-TheChad