New Life Games LLC
**Reel Slots** Gaming Machines => IGT S2000 and Vision Games => Topic started by: SlotMachine4You on July 15, 2015, 05:38:44 PM
-
Wondering if anyone would have the PAR sheet for the 21 Gambler.
I currently have a WTB ad for chips and strips and in my quest to locate them, was asked if I had this info.
It is a 3 coin, single line 5 Times Pay theme.
Thanks,
Mike
-
I have a 21 Gambler, of you need info on it I can get it for you
-
Thanks. I was able to obtain the PAR sheet.
Have a question on the top VFD display. I understand it plugs into the netplex. I'm missing the cable. I have one that will plug into the back of the display but the other end is different. I posted some pic's here:
http://newlifegames.com/nlg/index.php?topic=7650.msg40857#msg40857 (http://newlifegames.com/nlg/index.php?topic=7650.msg40857#msg40857)
Can you post a of your netplex harness so I can duplicate it? Would be much appreciated. I Don't want to mess up the pin order.
I'm looking for reel strips too and noticed they are identical to a 5 times pay except for the special symbol on the 3rd reel for the 21 gambler. I ordered a set from Rudy's so I'm 2/3 of the way there.
Mike
-
I will take a pic for you sometime tomorrow and post it
-
Thank you. That will be a big help.
-
Mike, As far as the harness goes for the aux. top box display they are all the same on the barcrests, That being said rob and many others have these, just a matter of the pin-out -I know. I prob. have one left around here but would have to dig. Much easier for someone to slide the top glass off, un-plug and snap a couple pics for you. That harness plugs into the netplex on the back dist. board in top box.
-
Yes. A picture would be most helpful. I'm guessing that I could just duplicate the pin order on the other end of the harness but I'd like to be sure before applying power.
-
Yep, Worry about both ends -wire colors don't matter-pin-out does.