**Reel Slots** Gaming Machines > **Reel Gaming Machines** **General Chat**

Need voltages for several hopper motors

(1/1)

mwade109:
I am about to go through my hoppers I have accumulated to put up for sale but I am having a hard time looking at schematics (not real good at that) to figure out the actual motor voltage.  I want to hit the hopper motor with the appropriate power just to make sure they actaually spin. I don't want to hit one with 110v ac when it may need 28vdc.  Can anyone chime in with the voltages for the following?

Bally:
E1000
E2000
5000+

IGT:
Fortune 1
Fortune 2
M
S+
S2000

Thanks!
-mike

mwade109:
Ok, I will start, the voltage for IGT Fortune 1 hopper motor is 110vac

Anyone else can feel free to jump in.

Badbaud:
24 VDC for S2000 and Bally 5000.
If the motor has a + and - marked on the motor it is a DC voltage motor.

jakah440:
Did a quick search on NLG and found this
https://newlifegames.com/nlg/index.php?topic=27328.msg143752#msg143752

mwade109:
Thanks for the info.  The two that I need to list currently are from Bally E1000 and Bally E2000.
I am thinking 120vac as the treminals are marked 50 and 60hz, on the other side both hopper motors simply say COM 221, not sure what that means but I dont want to fry them.  Hopefully I can get the info online or possible here.  Thanks again for any help!
-mike

Navigation

[0] Message Index