New Life Games LLC
**Video Poker, Keno, Slots, 21** Gaming machines => BALLY Game Maker => Topic started by: coolwavepic on April 11, 2014, 08:23:16 PM
-
Wanting to convert an Alpha to a Game Maker HD and need to know what parts I need to obtain to do the conversion.
Software (of course)
Buttons (do I need the GM button deck or will it run without)
if so...
What other boards do I need?
Thanks for your input. I can not find an Alpha GM manual.
Charles
-
A cabinet is cabinet ...do you have the same cabinet as the GM HD games you've seen?
If so, the it's just a game change,
If NOT, then you may being a for a full-on mp conversion. Can you change a Chevy into a Ford? No...can you change a F150 into a F350? Probably....with enough money, almost anythings possible.
-
The machine I'm working on is an Alpha v20/20. I have seen GM on these.
When I try to install the game everything loads fine but I am have a USB COMM error. Just wondering what part I need.
I am also talking about Slots... not cars which I know nothing about...lol :Tongue_Out:
-
The button deck is diff. and it uses a seperate controller board that uses usb etc. I have not put one together but this is a fact--Have to have the board and correct setup. Coolwave this is why it will not work--it does not see the hardware on boot-up hince-error.