New Life Games LLC

**Reel Slots** Gaming Machines => Bally Reel Games => Topic started by: gposing on September 10, 2016, 10:53:16 AM

Title: Bally 6000 Denomination Problem
Post by: gposing on September 10, 2016, 10:53:16 AM

No matter what I have switch settings on, after I do a ram clear it is always .50 machine.   I have it setup just like my other 6000 and he board will not change to a quarter.  any ideas?

Title: Re: Bally 6000 Denomination Problem
Post by: Sunrise Side on September 11, 2016, 05:36:58 PM

Maybe you have a bad DIP switch? When you do the RAM clear,  you are getting the buttons on the deck to blink , indicating a full clear?

Title: Re: Bally 6000 Denomination Problem
Post by: gposing on September 11, 2016, 05:54:23 PM

Full clear did work.  I did try diff. Settings with the switch but not a new switch.  I will give it a try.

Title: Re: Bally 6000 Denomination Problem
Post by: gposing on September 12, 2016, 05:52:56 PM

Tried the new switch did not fix it, but I did find the problem.  Removed the board from the tray and having to look very closely someone soldered jumpers to the back side of the board.  removed jumpers and all is fine now.