New Life Games LLC
**Reel Slots** Gaming Machines => IGT S2000 and Vision Games => Topic started by: slotdoofus on June 18, 2017, 01:47:50 PM
-
Wanted:
I need the schematic for the back-lit reel LED board. I need the 5 reel board type schematic. This for a S2000
Board P/N 75151030EC
There's not much to this board. I'm trying to determine the proper surface mount LED to buy for a repair job.
-
I took some measurements...the LED is 3.5mm x 3.5mm x approximately .86mm
I'm guessing these are the 3535 series LED
http://www.ebay.com/itm/50PCS-repair-LG-led-TV-backlight-strip-diode-3535-SMD-LED-beads-6V-/172708962328?hash=item283641a018:g:9DkAAOSwYvFZMNgk&vxp=mtr (http://www.ebay.com/itm/50PCS-repair-LG-led-TV-backlight-strip-diode-3535-SMD-LED-beads-6V-/172708962328?hash=item283641a018:g:9DkAAOSwYvFZMNgk&vxp=mtr)
-
S2000 reel lights are powered by +13Vdc. The incandescent bulbs (359X) are rated for 14V. I don't think the 6V SMD will be compatible or at least not for long.
:burningresistor:
-
Thanks Ron...
So, the LED version of the back-lit reels run on the same voltage as the incandescent version? I'll have to get out the multimeter and see what those lamps board inputs measure...By the time I invest in a hot air station, and replacement LEDs, I can buy 2 complete set of back-lit reels. Doesn't seem to be worth the trouble/expense.