New Life Games LLC

**Reel Slots** Gaming Machines => IGT S2000 and Vision Games => Topic started by: rwalker192 on April 09, 2018, 06:26:36 PM

Title: Can't complete clear
Post by: rwalker192 on April 09, 2018, 06:26:36 PM

I picked up a S2000 Triple Diamond missing the sg and game chips. I installed a SB100230 and SG000363 game chips. When i run the clear chip all is normal, but when i put the SB chip back in i get push reset button for 3 seconds then close door, at that point it puts me back to push test button. I can't get past that point.


Thanks for any help

Title: Re: Can't complete clear
Post by: RB on April 09, 2018, 06:36:35 PM

Bob,
Why is there no Version chip on that board? Maybe that's the problem. There's no battery in the holder either.

Title: Re: Can't complete clear
Post by: rwalker192 on April 09, 2018, 06:40:36 PM

Your right!! Do you know what vision chip should be in this?

Title: Re: Can't complete clear
Post by: RB on April 09, 2018, 06:45:09 PM

VS011GX1 would be my choice. 11GX0 will work & probably any previous version. 11GX1 give split screen display & multi denom capabilities.

Title: Re: Can't complete clear
Post by: rwalker192 on April 09, 2018, 06:46:36 PM

Thank You!  I'll check tomorrow