New Life Games LLC
**Video Poker, Keno, Slots, 21** Gaming machines => BALLY Game Maker => Topic started by: br549autosales on April 10, 2018, 08:09:00 AM
-
Moved my Gamemaker from my house to carry it to my dad in law's house, and now I can't keep the picture from rolling. Worked perfectly fine up until now. Could it be a bad or dirty adjustment pot possibly? Thanks
-
Pull the monitor out and plug it back in.
-
Tried that, still doing the same thing
-
I'd also try cleaning the vertical hold potentiometer. It might be something a little more complicated though, that happened with the move - if you jarred sometime too much. What kind of monitor is it? I'd also check all the IC's on the circuit board, in case one needs re-seating. Discharge the CRT of course, or be careful. :lightningbolt: :lightningbolt:
-
I'd also try cleaning the vertical hold potentiometer. It might be something a little more complicated though, that happened with the move - if you jarred sometime too much. What kind of monitor is it? I'd also check all the IC's on the circuit board, in case one needs re-seating. Discharge the CRT of course, or be careful. :lightningbolt: :lightningbolt:
I had same problem above the monitor there are adjustments it hard to get them just right but move them slow it will say vertical horizontal ect..
-
Does the monitor have a small vertical board in the center that is shaped like the state of Nevada?
-
On the picture itself or on the chassis?
-
On the chassis.
-
I will look when I get back home this weekend, thanks