New Life Games LLC
**Video Poker, Keno, Slots, 21** Gaming machines => WMS Williams Video => Topic started by: Dirtguy on April 23, 2018, 12:24:53 PM
-
Hi
I have a BB 1.5 With the hot hot penny button panel , buttons all work like they are supposed to, but not one lites up. All bulbs are good (checked). Plugs on the door are plugged tight. In setup, button panel set to standard. Have Mo Jo Rising installed that does not need Hot Hot Button but button works as max bet, has a two wire plug connected to ribbon board . Is there another plug some where that supplies power to the button bulbs that I'm missing. I tried a panel without the Hot button that also works, but no lites on that one either. Any ideas?
Thanks Dirtguy
-
Hi
I have a BB 1.5 With the hot hot penny button panel , buttons all work like they are supposed to, but not one lites up. All bulbs are good (checked). Plugs on the door are plugged tight. In setup, button panel set to standard. Have Mo Jo Rising installed that does not need Hot Hot Button but button works as max bet, has a two wire plug connected to ribbon board . Is there another plug some where that supplies power to the button bulbs that I'm missing. I tried a panel without the Hot button that also works, but no lites on that one either. Any ideas?
Thanks Dirtguy
On the top right hand corner of the back plane there are 5 led's that turn green to indicate voltage when you power on the machine, are all 5 green?
-
Yes they are all lit
-
Yes they are all lit
Pull the MPU/CPU from the back plane and reseat it.
-
I had the same problem with a BB1. Not sure if the BB1.5 is the same. It was the part on the back wall. I think its called the auxiliary power supply. Tried posting pic but having problem. Good luck!
-
Got pic.
-
FIXED
I re-seated the CPU and now have lites! Thanks to Bpracer & everyone on NLG!