New Life Games LLC
**Video Poker, Keno, Slots, 21** Gaming machines => Bally Alpha (Cinevision), and ALL Bally "V___" series - V5000, V2000, V1000, etc. => Topic started by: coolwavepic on June 03, 2014, 09:46:29 PM
-
I have a button that stopped working on my M9000. It's the 4th button on the bottom row. I changed out the button thinking the button went bad, but when I replaced the button it still doesn't work.
If it's a wiring issue, do I have to replace the whole wiring kit?
Any thoughts?
-
Do a continuity test from the button's plug-in connector to the other end of the harness. It could be just a broken wire inside, then you just replace that wire from end to end.
-
I fixed this a while back, and if anyone has this issues here is how to fix it:
PULL THE MPU OUT
PUSH THE MPU BACK IN...FIRMLY....
That's it!
LOL