New Life Games LLC
**Reel Slots** Gaming Machines => IGT S2000 and Vision Games => Topic started by: Cashen87 on October 03, 2018, 03:13:46 AM
-
Hello. I found this part in my machine. I wondering how i can replace it back?
-
Pic. 2
-
That is what the door latches on to when you close the door and press the lever down.
You need to temporary remove the bill validator and maybe it's cage to get to it.
-
Yes. I have tried to turn this on again where it belongs but it will not get stuck. This was bent when i got the machine. How can i get this one to sit in place?
-
Hard telling. The hole is probably damaged and/or threads stripped. There are two other latches, maybe it will be ok for home use without it. Does the door shut good, with no open door errors without it?
-
Yes. The machine working good and no errors
-
Probably no need to worry about it then.
-
OK. It is possible to get new part or fix it?
-
Have you checked to make sure that the mounting bolts not broken off in the threaded hole in the cabinet? I don’t see any threads sticking out of that roller?
-
Yes. This part will not get stuck
-
I don't know how i can fix this to sit in the cabinet.
-
You might not be able to fix that if the mounting hole is damaged. The hole may have to have the threads repaired with a thread tap or at least a new mounting stud or bolt.