New Life Games LLC
Bill Validators, Currency Acceptors and Printers => JCM WBA 10, 11, 12, 13, 14, 20, 21, 22, and 23 Bill Validators => Topic started by: DoubleZero on December 28, 2018, 07:28:55 AM
-
Are there any reasons why a JCM WBA-12/13 BV System pulled from a working s2000 upright won't just plug and play with the pictured IGT slant top? I'm looking for any issues before I sell a couple BVs that have been gathering dust.
-
cant tell from the picture, maybe need brighter, but look at the connector that plugs into the transport ( i dont see a connector int he housing
-
These look pretty standard, yes?
-
Those are DBV connectors. You need the WBA frame with harness, power supply, stacker, related bezels to install a WBA 12/13 in that.
-
Those are DBV connectors. You need the WBA frame with harness, power supply, stacker, related bezels to install a WBA 12/13 in that.
Thanks, Ron. So are all those items interchangeable from an upright to a slant top? Here's what I've got:
-
looks like you need the Phihong power supply or the version with the holes in the outer cover. and probably a snub nose type bezel to mate with the door bezel. and naturally you need the software for a S+ WBA, or have the unit flashed for the same.
Jim
-
looks like you need the Phihong power supply or the version with the holes in the outer cover. and probably a snub nose type bezel to mate with the door bezel. and naturally you need the software for a S+ WBA, or have the unit flashed for the same.
Jim
Aha. Awesome! That’s what I needed. Thanks, Jim.