New Life Games LLC
**Reel Slots** Gaming Machines => IGT S and S-plus Reel Games => Topic started by: jchaney0507 on January 03, 2019, 07:05:11 PM
-
I have a times ten S+ machine and i am getting the 3100 code flashing after a ram clear. I just purchased machine with a 61 code. After a few Diag attempts I was left to do a ram clear. The clear went smooth but now I get the 3100 code after using a 15 chip to fix bill validator. ( the bill validator just constantly clicks but never turns like accepting money). The code will flash 3100, then a 1 and then back again. The only other bit of info I can give is the machines optic sensors have been cut out and the wires on the door ties together and the machine tied together. I have checked the hooper to see if I can see any physical problems but for the most part this machine is very clean. Thanks in advance for the help.
-
Can u post some pictures of the machine
-
It keeps telling me my photo size is to large, what do I do?
-
Pic
-
Pic
-
You cannot just short together the door optics wires on an S+. I would recommend buying a set of working S+ door optics and installing them on your machine.
-
Plugging in that white Molex connector with the black cover on it's wiring that's hanging down next to the bill acceptor would help too.
It goes right in the front-most white socket on the left side of the bill acceptor.
Do some reading in the S+ forums here on NLG to familiarize yourself on how to use the SET chip to enable the bill acceptor.
However, I must pre-warn you that these older bill acceptors may only accept older bills.
They haven't really been upgraded a whole lot as these machines have faded out from the casinos.
With that said, quarters or nickels are fun to use! :)
-
The DBV 200 can be programmed to take the new $20's and old $100's.
-
The optics make sense. I will look for those. The connector on bill acceptor was disconnected to make it stop clicking during the reset procedure.
-
The DBV 200 can be programmed to take the new $20's and old $100's.
okay, that's good.
I was thinking of the older DBV's. :duh:
-
The older DBV145 heads can take the new $20.
-
The older DBV145 heads can take the new $20.
Okay...I better retire Badbaud! Lol
That is amazing...I've been away for awhile...
I didn't even know the guys found a way to update those ol' DBV's?
I better catch up on some reading!
-
You can't retire until I do!