New Life Games LLC
**Video Poker, Keno, Slots, 21** Gaming machines => IGT I-Game and Game King => Topic started by: suvasam on March 12, 2019, 06:29:16 PM
-
i want to install a lcd screen in my game king is the video card in my mpu work well here is a picture of my mpu
-
Is your machine standup or slant top? The standup 17" cabinets are plug and play, just slide out old CRT, slide in LCD. You need to change bezels too, make sure LCD comes with one. Not too sure about slant top cabinets.
-
Should be the same with a slant top, direct drop in replacement. The upright and slant top use a different mounting frame.
-
stand up upright
-
There's 19 pin and 25 pin monitors. Make sure you order the one you need for your machine.
-
i have a 19 pin are they expensive
-
Used LCD Monitors are hard to find and usually go for $225.00 and up. New ones thrift Ceronix run about $500-$600 range. You could check with Spininc. They do carry them sometimes.
-
is anyone selling one in the 250.00 range
-
I see you have a deluxe 044 board. Some of the LCD's have a jumper you need to change for 044 or you will get a dark screen you can barely see the blue box when you turn it on. EDIT: Ceronix 19 pin LCD's have the jumper I am talking about. It is about a inch or so above the VGA port. I believe all CRT's were 19 pin and ran to analog VGA port, and the 25 pin run to DVI-I port in back of monitor.