New Life Games LLC
**Reel Slots** Gaming Machines => IGT S2000 and Vision Games => Topic started by: Jaycyn414 on August 13, 2019, 08:12:25 PM
-
Hello everyone, i have a S2000 with a 1270 board with a R0000232 flash board Double gold. It was working great, i am getting ready to sell another machine that had a MEI validator in it so i decided to take that out and replace the wba that was in the double gold. Well, after i installed the Mei into the double gold it just stays stuck in authentication. I hit spin and says authenticating header and then it goes to local authentication. Gives the option for offset set, sha calculation, MD5 calculation and restart. Is there an offset code i need to punch in? All help is appreciated, thank you.
-
Try auto-config. Or I think settings lets you say what validator you have.
-
I cannot get to settings the way it is, even after a clear and keychip applied.
-
What clear are you using you know R boards need RBK00002 chip to clear and key
-
What clear are you using you know R boards need RBK00002 chip to clear and key
What is the difference between RBK00001 & 00002? I've never used a 00002. The 00001 has always done the job for me.
-
Not sure what the difference is. A 001 or 002 should work here
-
I have been using RBK00001, the 001 has worked in the past, keyed it for my tito install no problem. I'll look for a 002 and give it a try.
-
The 001 should be fine.
Try reseating the R board on the CPU.
-
Got the game going, i ended up swapping the 1270 board and it came back. Also found an issue with the reset button circuit on the original board, installed new button/switch and tried in another machine with a legacy board and pressing switch does nothing. Thank you to all that helped.
-
Not sure what the difference is. A 001 or 002 should work here
RBK00002 is for RGW (WAP) flash boards. Stumbled across that tonight while browsing through some PSRs.