New Life Games LLC
**Reel Slots** Gaming Machines => Bally Alpha Reel Games => Topic started by: iwalker on September 24, 2019, 06:28:08 AM
-
Hello Everyone
Its been a longtime since worked on this platform. Recently had to fix some of these at a casino in Madagascar.
I have one 3 reel machine (Diamonds and Devils) that is giving me Mechanical Reel 4 and 5 Device Error Tilts.
The following has been done
* Ram Clear
* PSU Swap with working machine.
* RCU unit swap with working machine.
Any advice on how to clear these tilts appreciated.
TIA
Ian
-
There is a 3 reel and a 5 reel version of the software, are you sure you are using the correct one?
-
The 3 reel software version is this one : ASGDMDV1NVUI-XX
And the 5 reel software version (most common) : ASGDMDV01001-XX
-
I have one in the shop and it gives that error every once in a while, shoving the reel latches back in fixes it.
-
Not positive on this but aren’t there 3 reel and 5 reel rcu’s
-
No, the rcu's are all the same.
-
I just finished working on one with the same error. I reseated the reels , the reel wire harnesses to the back plane, the USB cables at the backplane, reseated the MPU, reseated the RCU, the cables going to the front of the MPU, and I used Deoxit on all the connections I reseated, cleared it twice, and no cigar. Swapped in a known working RCU and its up and running.
-
Thanks all for the suggestions.
3 Reel software confirmed. Under Diagnostics Reel Test is working fine and reels are matching test image.
RCU already swapped but will give this a shot again.
Will also ask tech on site to re seat all connnectors relavant to the reel sections.
Regards
Ian
-
Do you use a 3 reel harness or a 5 reel harness (modified with connectors at terminal 4 and 5 ?
-
Hi All
Thanks for all the suggestions. Tech on site reports that another RAM Clear solved the problem.
Regards
Ian