Title: Re: Zero Checking Flash freezed up on IGT Game King Plus (Trimline)
Post by: Tilt on February 17, 2014, 10:51:12 AM
« Reply #4 on: January 04, 2012, 01:46:40 PM »
Same problem with mine but a 044 board.Did the second amber LED from the test switch go out also when it got to the "zero checking flash"?
I fixed mine the same way by replacing the battery also.The weird thing about mine was the battery was reading 3.5 volts.
laneman
Title: Re: Zero Checking Flash freezed up on IGT Game King Plus (Trimline)
Post by: SlotMachine4You on March 12, 2014, 03:32:15 PM
Having the same problem and in addition, when it does start up after a few tries, the screen position moved to the left a few inches and I have to reset the screen settings. Will try replacing the battery. Mine reads full voltage as well. Thanks!!
Title: Re: Zero Checking Flash freezed up on IGT Game King Plus (Trimline)
Post by: Tilt on March 12, 2014, 07:51:43 PM
Let us know how it goes, hope it fixes your problem as well.
This topic was moved over from the old site, I still have about three more pages of topics to sort through and re-post yet.
Title: Re: Zero Checking Flash freezed up on IGT Game King Plus (Trimline)
Post by: ChoiceMc on April 19, 2018, 04:34:30 AM
Hey guys,
I used to fix these problems by replacing the battery, but now i have an IGT iGame machine which is stuck on Zero checking flash, the second amber led from the right is dead. I replaced both batteries. What could be causing this?
Thanks.
Title: Re: Zero Checking Flash freezed up on IGT Game King Plus (Trimline)
Post by: rickhunter on April 19, 2018, 11:52:55 AM
Bad flash board. Sometimes reflashing it works, but it has been my experience that most of the time, flash board has gone bad.
Title: Re: Zero Checking Flash freezed up on IGT Game King Plus (Trimline)
Post by: ChoiceMc on June 22, 2018, 05:12:13 AM
Bad flash board. Sometimes reflashing it works, but it has been my experience that most of the time, flash board has gone bad.
Hey man, sorry for the late reply, not much online lately. Anyways iInotice I made a mistake in my previous post - the second amber LED from the LEFT is off. I've replaced the machine since I couldn't get it to work, but if anyone has any other solution it'd be highly appreciated as I intend to use the machine again :)