New Life Games LLC
**Reel Slots** Gaming Machines => IGT S2000 and Vision Games => Topic started by: Phan000 on August 20, 2020, 11:53:42 AM
-
Bought a candle, now I don't seen any connection to hook it up.
The fan was previously removed, so wiring may have been cut or removed also.
Where is this thing supposed to connect? None of those ends match the wiring end for the candle.
Thanks
(https://i.imgur.com/6fey3fj.jpg)
-
Here
-
Here
The ends are different. I could cut and use a connector?
(https://i.imgur.com/nfuWm7I.jpg)
(https://imgur.com/gallery/KEYW6EC)
-
That's not a S2000 candle but you could certainly make it work. Verify that the bulbs are the correct voltage 12-14v.
-
I got it to work with jumper wires, but am reluctant to cut the ends.
The machine has 5 wires going to that connector & the candle has only 3+ground
Which ones should be connected to Red, yellow, black?
-
S2 candle only has 3 wires too. Obviously the red is 13V+, brown white stripe goes to lower bulb socket, black/white to upper. Identify which color wires in yours follow that pattern and go from there.