New Life Games LLC
**Video Poker, Keno, Slots, 21** Gaming machines => WMS Williams Video => Topic started by: tjlee on August 15, 2014, 06:30:33 PM
-
I am trying to help a friend hook up a TITO in a BB1 slot. Can somebody give me the pinout for the auxiliary power socket on the motherboard on this. Photo is attached. I cannot find a wiring manual anywhere and I have never owned one of these slots so this socket is Greek to me. Thanks
-
Here you go.....but why aren't you using the RS232 port instead. It's a standard port and you can use a standard serial cable to connect to it. It's on the lower left corner of the backplane.
-
OK I can see the wrong picture was posted for the auxillary power socket. It is letter "O" in the picture shown in the last post. I need +12vdc and ground pinout for this socket. I think it is J16 but don't know for sure. Sorry for the confusion. Thanks TJ
-
J16 and J22 these are the voltages.
pin1 = 24v
pin2= 24v
pin3= 12v
pin4= 5v
pin5-8 = ground
Always check with a multimeter just in case.
-
Thanks for the replies. :1: