New Life Games LLC

**Video Poker, Keno, Slots, 21** Gaming machines => Bally Alpha (Cinevision), and ALL Bally "V___" series - V5000, V2000, V1000, etc. => Topic started by: Dave T on January 03, 2021, 04:10:56 PM

Title: Alpha Pro 2 V22/42 Error 137 loading Fault Manager Module
Post by: Dave T on January 03, 2021, 04:10:56 PM

Hello!  I could use a hand.  I installed a new hard drive, OS_360A, with the intention of following with game software for Quick Hit Cash Spin.  After installing the OS, CPU was powered down, OS removed and game card installed, powered it on and after a few minutes received Error 137 loading Fault Manager Module, with the CPU beeping about every two minutes while powered on.  Card info - Install: 227207D, Bundle: 234533A, Game: 302741B  CPU 2.1, Video card: Quadro K2000  I do see the Bally screen after powering on, but once it progresses, the error is thrown.  Because I cannot get to the menus, I cannot perform a factory reset.  Any assistance that can be provided would be greatly appreciated!   I've attached pics of the error message, install screen, and cards.  Thanks!!!

Title: Re: Alpha Pro 2 V22/42 Error 137 loading Fault Manager Module
Post by: rickhunter on January 03, 2021, 11:01:52 PM

After installing the OS, did you also install the game?

Title: Re: Alpha Pro 2 V22/42 Error 137 loading Fault Manager Module
Post by: Dave T on January 04, 2021, 04:57:49 AM

Rick - That's where the problem started.  After the the OS successfully installed, I powered it down, removed the OS card and replaced it with the game card, after powering back up, the error started.

Title: Re: Alpha Pro 2 V22/42 Error 137 loading Fault Manager Module
Post by: idesign on January 04, 2021, 08:51:08 AM

That OS 360A may not support that game.  I thought it needed 361F minimum, or 362D.

Title: Re: Alpha Pro 2 V22/42 Error 137 loading Fault Manager Module
Post by: Dave T on January 12, 2021, 04:37:17 PM

OS/BIOS issue.  All back to normal now.  Thanks for the help guys!