New Life Games LLC
**Reel Slots** Gaming Machines => IGT S2000 and Vision Games => Topic started by: laraider on January 22, 2021, 01:51:07 AM
-
Just got a IGT S2000 machine, opened up the top part, found a looks like futurelogic gen1 printer, but can't figure out where the power plug should go, the netplex cord is already plugged in.
Trying to get it to work! Please help, thx!
picture is the power plug loose in there.
-
Just got a IGT S2000 machine, opened up the top part, found a looks like futurelogic gen1 printer, but can't figure out where the power plug should go, the netplex cord is already plugged in. Trying to get it to work! Please help, thx!
picture is the power plug loose in there.
It is not used. The power is included in the netplex connector. The printer needs to be enabled in the key chip menu. Your tickets appear to be in backwards. The large index mark goes toward the right front facing up.
-
Just got a IGT S2000 machine, opened up the top part, found a looks like futurelogic gen1 printer, but can't figure out where the power plug should go, the netplex cord is already plugged in. Trying to get it to work! Please help, thx!
picture is the power plug loose in there.
It is not used. The power is included in the netplex connector. The printer needs to be enabled in the key chip menu. Your tickets appear to be in backwards. The large index mark goes toward the right front facing up.
Thank you so much RB.
I will test it out when i got my key chips and paper.
Also, seen a lot of gen2 printers available but not gen1, is gen2 better? i need to get 2 more printers for my other machines.thx
-
Gen 2 not necessarily better. I like the older ones fine but they are heavier and more expensive to ship.