New Life Games LLC

**Reel Slots** Gaming Machines => IGT S and S-plus Reel Games => Topic started by: diver7325 on April 07, 2021, 07:06:36 PM

Title: Service Button Light
Post by: diver7325 on April 07, 2021, 07:06:36 PM

Does anybody know a way to get the light on the service button to light up?  I have read that it was not wired up on the up-right machines (IGT S-plus machine) but I would like for mine to light up when I push it...the light on the top candle will light up when it is pushed, but the light bulb behind the button will not light.


If nobody has figured it out, I will continue to try to figure it out, I don't think it should be that hard to figure out...


Thanks in advance for any help that can be given!!!

Title: Re: Service Button Light
Post by: Trisail on April 07, 2021, 08:28:51 PM

You would need to add the lamp holder to the button just like the other switches. I think the easiest way to turn the lamp on would be to extend the service lamp wires to the the front panel to the new lamp in the button. Take then all way down from from the candle lamp or intersept then from the motherboard connection. Which ever way sounds easier to you. Trying to get a spare (if one exsists) from the i/o board would take some pcb rewire work, but possible. Hooking the lamp up to the existing tower lamp would seem easiest.

Tony

Title: Re: Service Button Light
Post by: diver7325 on April 09, 2021, 06:23:15 AM

Luckily all my switches are the same...it took a little time, but I figured out what each terminal on the switch did...now it is time to run the wiring and get it wired up, once I have it finished, I will post pictures...it is really an easy fix once you figured out the switch terminals.  If anybody else wants to do it, let me know and I will tell you how I did it.