New Life Games LLC
**Reel Slots** Gaming Machines => IGT S and S-plus Reel Games => Topic started by: alrolon800 on April 18, 2021, 06:25:25 PM
-
got one of two machines working and wanted to replace a few burnt out bulbs on the front panel. the holders disintegrated from age when removing and now i need to replace a few. on my s-plus i need to replace "play 2 credits (larger button)". the change and cash out buttons (smaller buttons). I have bulbs so just need complete button assemblies (bulb holder and micro-switch). do the S2000 buttons fit?? all I see is vendors looking to sell assemblies for 60 bucks or more!!! What are the sizes im looking for. I think one is 1" dont know the other, maybe 1 1/2" ?? Again s200 buttons look exactly the same..
-
the buttons appear to be the same, and in some cases they work. The determining factor is the actual opening of the assembly where the lamp and switch assembly slide into the opening. most S plus lamp and switch assemblies will not snap into place and stay inside the barrel of the assembly. If you have complete S-2000 with their respective lamp and switch assemblies, then all you need to do is transfer the wiring.
Hope this helps
Jim
-
Replacing my larger one - Instead of Play two Credits or Play three Credits, I changed mine out to Play Max Credits.....
That way if you change game kits from 2 coin to 3 coin to 5 coin or 9 coin you always have the right button....
-
thanks guys!!!