New Life Games LLC

**Reel Slots** Gaming Machines => IGT S and S-plus Reel Games => Topic started by: Jackpot on April 29, 2021, 10:15:37 PM

Title: going from coin compairtor to mechancal coin acceptor in s-plus
Post by: Jackpot on April 29, 2021, 10:15:37 PM

I am changing out a cc-16D coin comparator to an IMenx or a standard type coin acceptor. I know if it starts throwing out coin in errors that there is a micro resistor? Located the optic board that needs to be removed to fix the error problem. Anyone have a sheet on this or information you can point me to? I know I did this once before but not sure where I got the information on it, it could have been from here at NLG?
Thank You Jackpot

Title: Re: going from coin compairtor to mechancal coin acceptor in s-plus
Post by: GOS on April 29, 2021, 10:31:24 PM

the Q2 or Q4 depending on the optic board - remove - and imonex will work

Title: Re: going from coin compairtor to mechancal coin acceptor in s-plus
Post by: Jackpot on April 29, 2021, 10:36:01 PM

Quote from: Jackpot on April 29, 2021, 10:15:37 PM

I am changing out a cc-16D coin comparator to an IMenx or a standard type coin acceptor. I know if it starts throwing out coin in errors that there is a micro resistor? Located the optic board that needs to be removed to fix the error problem. Anyone have a sheet on this or information you can point me to? I know I did this once before but not sure where I got the information on it, it could have been from here at NLG?
Thank You Jackpot

Solved, I found my old post about this.

Title: Re: going from coin compairtor to mechancal coin acceptor in s-plus
Post by: Jackpot on April 29, 2021, 10:38:43 PM

Quote from: GOS on April 29, 2021, 10:31:24 PM

the Q2 or Q4 depending on the optic board - remove - and imonex will work

Thanks, i did some more searching and I found it, missed it on the first search. Thank You! :1: