New Life Games LLC

**Reel Slots** Gaming Machines => IGT S and S-plus Reel Games => Topic started by: therockinelvis on September 06, 2014, 12:03:44 PM

Title: S+ dual progressive set up
Post by: therockinelvis on September 06, 2014, 12:03:44 PM

Have a few machines with the dual progressives. All have SP1271. What set chip is needed to set up? Anyone have a detailed list for "dummies" instructions?

Title: Re: S+ dual progressive set up
Post by: jay on September 06, 2014, 03:45:30 PM

I don't recognise the controller.
The Set90 is used to progressives with the mini photon controller.

Title: Re: S+ dual progressive set up
Post by: foster on September 06, 2014, 04:37:41 PM

That is a S+ Spectrum.
Configure the S+ for standalone 2 level progressives.

Title: Re: S+ dual progressive set up
Post by: therockinelvis on September 07, 2014, 05:01:12 AM

So use the set 90? Is it pretty much self explanatory? I am guessing a base value and max. value and a percentage of increase? Anyone have a cheat sheet for easy programming? I have 5 to do. These machines used to be megabucks, DD Deluxe, 5X, RWB, and Trip. Dia. They are still the same titles with a 1247 and reel strips without the mega symbol. I am assuming that the progressive will now be the jackpot overriding the say 2500 coins

Title: Re: S+ dual progressive set up
Post by: knagl on September 07, 2014, 06:45:23 PM

Quote from: therockinelvis on September 07, 2014, 05:01:12 AM

I am assuming that the progressive will now be the jackpot overriding the say 2500 coins

Those displays are designed for dual-level progressives (ie. top award and second-top award).  The PAR for whatever SP chip you're using will specify if it supports more than one progressive (look for the letter "P" next to the award on the PAR sheet).

Title: Re: S+ dual progressive set up
Post by: therockinelvis on September 08, 2014, 03:02:21 PM

I have a set 90. Does anyone have step by step instructions? I put the 90 in, but didn't know what to do from there. I found a 1271 psr but it stays in protected mode so I can't print it.

Title: Re: S+ dual progressive set up
Post by: Ron (r273) on September 08, 2014, 03:36:44 PM

Quote from: therockinelvis on September 08, 2014, 03:02:21 PM

I have a set 90. Does anyone have step by step instructions? I put the 90 in, but didn't know what to do from there. I found a 1271 psr but it stays in protected mode so I can't print it.

Here you go....

Title: Re: S+ dual progressive set up
Post by: therockinelvis on September 08, 2014, 04:52:53 PM

Thanks Ron, If I read it right; I will start at 31 and set for standalone. Didn't quite see where I set base and max. amounts. Wish me luck

Title: Re: S+ dual progressive set up
Post by: therockinelvis on September 09, 2014, 02:58:53 PM

OK I set it I guess. It is incrementing by .10 every 3rd max press for 3 times then on 4th max. When the door is opened or machine restarted the top progressive starts at zero and climbs to last amount. I could see this being a problem when it gets to ten thousand or so.  Is that right or did I do something wrong. Lower JP stays at set amount.