New Life Games LLC

Video Poker, Keno, Slots, 21 Gaming machines => WMS Williams Video => Topic started by: Phan000 on July 15, 2021, 03:55:06 AM

Title: Bb1 wba 13 wonâ€™t get past errors
Post by: Phan000 on July 15, 2021, 03:55:06 AM: I purchased a bb 1 goldfish game with a UBA installed. Machine works fine, no issues.

I put the UBA in a different machine, and have a WBA 13 with the enclosure. Multiple errors after booting up. Tried both jumper positions, tried with and without rs232, tried new transport (it is flashed correctly).

What is the correct jumper settings?

Any other ideas on what I can look at?

Thanks!
Title: Re: Bb1 wba 13 wonâ€™t get past errors
Post by: Phan000 on July 18, 2021, 05:38:51 AM: Would a bad harness from the enclosure cause this?

Initially, the DBV would get power, but give jam and switch errors.

Now no power, just BV comm error or BV device error.

Really at a loss for what to try next.
Title: Re: Bb1 wba 13 wonâ€™t get past errors
Post by: Phan000 on July 24, 2021, 05:48:09 AM: Got this sorted. Transport was eprom based rather than flashed.