New Life Games LLC

NLG Classified ads and White Sheet => NLG Classified ads and White Sheet - PLEASE READ DESCRIPTION BEFORE POSTING! => Topic started by: Iamwally on August 26, 2021, 05:20:58 PM

Title: Candle Mount for round-top S2000 needed
Post by: Iamwally on August 26, 2021, 05:20:58 PM: Hi folks! Trying to find out what the little plastic disc under the candle on a round top is called and where would I get one?

Thank you,

John
Title: Re: Candle Mount for round-top S2000 needed
Post by: lvdesertrat on August 27, 2021, 07:34:07 AM: It's a candle topper insert. You can make one with a piece of paper or plastic. No sense ordering one online that would cost more than it's worth.
Title: Re: Candle Mount for round-top S2000 needed
Post by: Iamwally on August 27, 2021, 07:41:17 AM: Thanks for the reply but I think you are misunderstanding, I am looking for the black plastic piece the candle sits on. It goes between the candle and the cabinet and is slight rounded on the bottom so the candle sits straight.

Thank you,

John
Title: Re: Candle Mount for round-top S2000 needed
Post by: Stayouttadabunker on August 27, 2021, 07:47:23 AM: The candle mount part for a roundtop topbox that you may be looking for is numbered...>>>

626 846 00 BRACKET, CANDLE MOUNTING, RND TOP

I'm not sure because IGT doesn't show a photo of it on my sheet... :(
Title: Re: Candle Mount for round-top S2000 needed
Post by: shortrackskater on August 27, 2021, 08:07:03 AM: Moved to NLG Classified - subject changed to reflect part needed.
~moderator
Title: Re: Candle Mount for round-top S2000 needed
Post by: Iamwally on August 27, 2021, 08:22:53 AM: Thanks so much!! Actually it looks to me like it might actually be the part right underneath that one

Spacer for round top. 674-488-00

Thank you,

John
Title: Re: Candle Mount for round-top S2000 needed
Post by: Jim on September 14, 2021, 09:14:50 AM: here is a picture of the item. These are not for sale.

this must be a number from a S plus, regardless, these came from a s-2000.

Jim
Title: Re: Candle Mount for round-top S2000 needed
Post by: Iamwally on September 17, 2021, 02:46:52 PM: If only I was any good at designing stuff in tinkercad!!! I have a 3d printer but I am no good at designing stuff from scratch. Maybe someone here is good at that and can make me a file? Lol!!!

Thanks,

John
Title: Re: Candle Mount for round-top S2000 needed
Post by: sixcardmark on September 17, 2021, 03:01:54 PM: Make a ring out of rubber or very soft plastic so when you screw down the candle it will make a seal.
Title: Re: Candle Mount for round-top S2000 needed
Post by: sixcardmark on September 17, 2021, 08:37:29 PM: I think this candle has a round top spacer: https://ebay.us/8iYqLF
Title: Re: Candle Mount for round-top S2000 needed
Post by: RobinAK on September 23, 2021, 07:30:35 PM: I have what you need. PM me your shipping address and I will send it out to you. Its 100% free. I feel like I owe it to this site as Ive gotten a ton of help and information here. I will even pay the shipping. The one catch... Im very very busy it might take me a bit to actually get it mailed out but I will get it done.
Title: Re: Candle Mount for round-top S2000 needed
Post by: RobinAK on September 29, 2021, 06:06:43 AM: Iamwally your inbox is full.

It was sent out yesterday via USPS flat rate. Usually takes an extra day or two as it was sent from rural post office up here in Alaska.
Title: Re: Candle Mount for round-top S2000 needed
Post by: Iamwally on September 29, 2021, 06:27:49 AM: Thanks so much for this!!! I really appreciate it!!!

Thank you,

John
Title: Re: Candle Mount for round-top S2000 needed
Post by: RobinAK on October 03, 2021, 07:03:24 AM: Did the package arrive?
Title: Re: Candle Mount for round-top S2000 needed
Post by: Iamwally on October 03, 2021, 07:52:14 AM: OMG!!! Yes it did on Friday!!! I meant to send you a message to thank you again and completely forgot because I basically worked fromFriday evening all the way to Saturday morning came home got some sleep and then had people over my house for my wifeâ€™s birthday!!! So Iâ€™m just now finally getting a minute to relax and maybe put it on the machine!!! Thank you so much for sending it!!! Hopefully one day this newbie can pay it forward to someone else just as you have!!!

Thank you,

John
Title: Re: Candle Mount for round-top S2000 needed
Post by: RobinAK on October 03, 2021, 08:32:56 AM: AWESOME! Glad I was able to help!
Title: Re: Candle Mount for round-top S2000 needed
Post by: RobinAK on January 12, 2022, 07:34:26 AM: Well the funny thing is now I need one of these.... :duh: Does anyone have one? I will make a new WTB post and link this thread in it for ease.
Title: Re: Candle Mount for round-top S2000 needed
Post by: Iamwally on January 12, 2022, 08:52:53 AM: Boy that stinks! I can send yours back to you if you like? I feel terrible that you are only without one because you helped me out.😢. Let me know.

Thanks,

John
Title: Re: Candle Mount for round-top S2000 needed
Post by: RB on January 12, 2022, 09:07:44 AM: Quote from: RobinAK on January 12, 2022, 07:34:26 AM
Well the funny thing is now I need one of these.... :duh: Does anyone have one? I will make a new WTB post and link this thread in it for ease.

:mail:
Title: Re: Candle Mount for round-top S2000 needed
Post by: RobinAK on January 13, 2022, 04:52:49 AM: Quote from: Iamwally on January 12, 2022, 08:52:53 AM
Boy that stinks! I can send yours back to you if you like? I feel terrible that you are only without one because you helped me out.😢. Let me know.

Thanks,

John

No no no... you keep it! And don't feel bad at all! Ron has a candle set up for me. Its all good!