New Life Games LLC
**Reel Slots** Gaming Machines => WMS Reel Games => Topic started by: DJC on August 28, 2021, 01:16:56 PM
-
Thanks to all who read this. I will try to make this as short as possiblehope. I hae a WMS Extra Extra Luck 3 reel machine, with a small screen at the bottom right of the door. I need help in identifying the boards and clear chips needed. The machine was in good order then i did noty turn it on for some time. Battery (2) died and were replaced. Next i did not have a clear card, i did aquire one. The machine does not go thru the clear process at this point. any help is appreciated. thanks Dave
-
What clear card are you using? Typically, that last message on the screen implies you have a corrupt card. Assume you pulled out the OS and game cards when you tried to clear and installed the clear card in the OS slot
-
The card made was an 1810. I am not sure what card was needed. I did not remove the game card when doing the clear. The pic posted was where the clear stopped. thanks for input. Dave
-
You use the word MADE so it's a copy card. 1810 is on a 64mb WMS card. The one you have is corrupt
-
ok. So from what i understand My extra extra luck 3 reel wms is a BB1 and Can use an 1810 Clear card. The card is corrupted and i need another. Ay clue as to where to get a good one ? and thanks you so much for the help.
-
By the way my board is blue
-
Board color does not matter. You can post a WTB on the classifieds and somebody will probably chime in.
-
Thanks everyone it was the clear card amen