New Life Games LLC

**Video Poker, Keno, Slots, 21** Gaming machines => WMS Williams Video => Topic started by: platmm on September 26, 2021, 02:09:58 PM

Title: BB2(e) emotive controller power cable pinouts?
Post by: platmm on September 26, 2021, 02:09:58 PM

Hi everyone - I managed to purchase a BB2 that wants to be a BB2e.   It has the top and bottom LEDs but the green cat 5 cable was cut.   Easy enough to rewire.

I purchased a new emotive controller board but there was no power cable included.  Does anyone know the pinouts that would be needed to connect to the "Aux Power" connector on the backplane?

It's an 8-pin to a 6-pin cable.  I have one of those, an old PC PCI-e power cable but I can't figure out what voltages the controller needs.

...or does anyone have one to sell?

Thanks so much! :)

Evie

Title: Re: BB2(e) emotive controller power cable pinouts?
Post by: platmm on October 28, 2021, 12:05:26 PM

(Just to close this thread out, Kristel at Slotrush was able to source one for me.)

Thaaats better. :)