New Life Games LLC
**Reel Slots** Gaming Machines => IGT S and S-plus Reel Games => Topic started by: Tmmybahama on September 16, 2014, 08:58:29 PM
-
http://rudysdeals.com/index.php?route=product/product&path=56&product_id=3106 (http://rudysdeals.com/index.php?route=product/product&path=56&product_id=3106)
Can someone tell me asap if this lock kit will not only work for IGT S+ door locks but for the belly door too on them???? (and will it work for sigma sg150s and/or WMS 400s??? (the Dot Matrix machines from 1999).. I am trying to get the final 25 machines done and ready to be sold or "put out in the world" so they can provide HOME AMUSEMENT for all (and have security your money isn't being borrowed or stolen).
I would just write Rudy, but I thought it would be quicker to do it this way on finding out the answer to my question, and then quickly ordering them if they are the right ones, (If not, which are?), and hopefully have them arrive at my doorstep by Friday....
-
See if this will help.
-
See if this will help.
THIS IS SO PERRRRRRFECT!!!!!! SUZO/HAPP is probably the lest expensive for locks then, yes???????
-
You can probably get them from one of the vendors on the home page for $10 each, give or take
-
Watch out for the surprise shipping from Happ.
-
Watch out for the surprise shipping from Happ.
Ok. Id rather go with one of the people here... I get taken care of when I buy from folks here anyways....
-
Good thinking, always best to shop at home when you can...
-
Just an example...
http://www.centralvalleyslots.com/igt-door-lock-amp-key-set.html (http://www.centralvalleyslots.com/igt-door-lock-amp-key-set.html)
-
Anyone up?
The picture shows cam length for the IGT main door, belly, and cash can. What about the length of the barrel? Is it 5/8" for all those also?
-
Belly cash box and main door use the same. I think the cash can is shorter
-
Thank you, but what size are they?
I'm trying to get the "Thumb turn" cam locks on ebay. No vendors here seem to sell them.
There's numerous lock lengths on ebay. They look less then an inch and I'm assuming all these are 5/8" but not sure.
-
Sorry, misunderstood what you were looking for and not at home to measure one
-
:duh:
Well now I just opened one of my s2000 and look what I found plastered in front of my eyes!
-
the 5/8 barrel lock fits the door - the belly glass door - the bill validator door - and the cash box - ALL use different length cams. FOXSSLOTS1 on ebay sells all the locks with correct cam lengths for all 4 applications.