New Life Games LLC
**Reel Slots** Gaming Machines => IGT S2000 and Vision Games => Topic started by: 61Wally on November 26, 2021, 08:11:01 AM
-
My Triple Double 7’s machine has the coin meters enabled. It’s somewhat annoying, I put in $100 bill and tha counter is ticking away 10 minutes later. I disconnected the ribbon cable going to the meters and that’s not the way to do it. The display now shows meters/counters disabled. So it must be something that needs to be done in the programming. Any thoughts of what menu it’s in, and is it easy to program out? Do I need to key chip to do this procedure? Thank You.
-
You have to jump two wires if you unplug the harness to meters. I found this post from foster:
Unplug the harness at the meter, locate the black with orange wire and the brown with gray wire
Jumper the black/orange and the brown/gray wires.
They are next to each other in the harness if you look closely at the meter board it does the same thing.
-
Just to clarify the 2 wires will be on one of the ends of the plug. Not in the middle.
-
Pins 9 & 10.
-
This information is in the very first post on the S2000 board. FAQ has a lot of information.
http://newlifegames.com/nlg/index.php?topic=327.0 (http://newlifegames.com/nlg/index.php?topic=327.0)
-
This information is in the very first post on the S2000 board. FAQ has a lot of information.
[url]http://newlifegames.com/nlg/index.php?topic=327.0[/url] ([url]http://newlifegames.com/nlg/index.php?topic=327.0[/url])
Yeah. A lot of people overlook that post. I think it needs a flashing light or something lol.
-
I burn the paper/plastic off a bread tie, bend and cut to size and use it for a jumper wire.
-
Thank You, I guess I was another one that Looked right over that posting it on. I appreciate the help and I will go take care of that and try it thank you again.
-
Works Great now, THANK YOU SO MUCH FOR YOUR ASSISTANCE.