New Life Games LLC

**Reel Slots** Gaming Machines => Bally Alpha Reel Games => Topic started by: Canaslot on December 23, 2021, 08:59:53 PM

Title: Bally Curve Sound Question
Post by: Canaslot on December 23, 2021, 08:59:53 PM

I have 2 different screens for sound setup on the Bally Curve.  One has the master volume which will change and still has volume when set at the lowest point.  The other has the game volume and will not move plus the external volume and it will not move either.  Am I missing something or do I have a bad sound card or is this normal?  I have not been able to find any info on this.

Title: Re: Bally Curve Sound Question
Post by: Canaslot on December 26, 2021, 12:53:29 PM

bump

Title: Re: Bally Curve Sound Question
Post by: sixcardmark on December 26, 2021, 01:31:57 PM

My sound mixer page does nothing either on my A2's. An upgrade to a 2.1 mpu, a 5.1 sound card, and a sound chair may all be required for the mixer page to become functional.  Maybe someone on here knows.

Title: Re: Bally Curve Sound Question
Post by: Canaslot on December 26, 2021, 04:50:05 PM

I have looked all over the internet for any info.  I have the curve operators manual and it does not mention much about the sound mixer.  I would assume there is a tech bulletin out there somewhere.

Title: Re: Bally Curve Sound Question
Post by: dailey on December 26, 2021, 06:03:19 PM

My machine is the same. What you have is normal. According to the "Operating System Software Setup", The mixer settings are pre-set and cannot be changed. You can only adjust the Master Volume.