New Life Games LLC

**Reel Slots** Gaming Machines => IGT S and S-plus Reel Games => Topic started by: 61Wally on December 28, 2021, 03:23:55 PM

Title: IGT S LIMIT SETUP
Post by: 61Wally on December 28, 2021, 03:23:55 PM
GOOD DAY TO ALL, I have a IGT WILD CHERRY 5 nickel slot machine and I’m trying to find out how to increase the limit of credits. I can put a $1,$5, or $10 and that’s it. I want to be able to use a $20 as well. Any help would be appreciated. I read a lot of threads on the S plus machine but nothing on the S machine.
Title: Re: IGT S LIMIT SETUP
Post by: Sunrise Side on December 28, 2021, 05:26:29 PM
I see it has an external BV. I'm thinking you have a S+ board in that cabinet which if it does, it is an early S+ , so S+ settings will apply. The BV may have a DBV145 or DBV 200 , which the DBV200 can be updated to accept the new  $20. Please  Post a picture of the inside.
Title: Re: IGT S LIMIT SETUP
Post by: 61Wally on December 28, 2021, 07:38:03 PM
Ok, I didn’t even pay attention to that. So if it’s a S+ board, I just set the parameters through the white reset switch?
Title: Re: IGT S LIMIT SETUP
Post by: 61Wally on December 28, 2021, 08:18:03 PM
One other note, I know the bill validator is working right, because when I do some tests like this, I have some older currencies that don’t have any color in them.
Title: Re: IGT S LIMIT SETUP
Post by: Sunrise Side on December 28, 2021, 08:20:54 PM
Yes through the white switch
Title: Re: IGT S LIMIT SETUP
Post by: 61Wally on December 29, 2021, 02:54:44 AM
Thx.
Title: Re: IGT S LIMIT SETUP
Post by: knagl on December 30, 2021, 01:40:57 PM
I can confirm you have an early S+ with an add-on bill validator. The S (non-plus) does not support bill validators.

Can you feed the working $10 bill in multiple times in a row and you get credits added to the meter each time? If so, you don't have a credit limit issue -- you have an issue with the bill validator not accepting the $20 bill you're using. It is possible that $20s are disabled on the validator head, or that the firmware in the validator isn't recognizing the $20 bills that you're trying.
Title: Re: IGT S LIMIT SETUP
Post by: 61Wally on December 30, 2021, 02:40:42 PM
I will double check that, Thank You.
SimplePortal 2.3.5 © 2008-2012, SimplePortal