New Life Games LLC
NLG Classified ads and White Sheet => NLG Classified ads and White Sheet - PLEASE READ DESCRIPTION BEFORE POSTING! => Topic started by: Harvs on October 01, 2014, 04:58:27 AM
-
Looking for a picture with the pin-outs or would be willing to buy the harness that runs from the amp to the machine. I have everything else needed I believe and really want to test this beast.
Thanks :cool_thumb_up:
-
I see RCA type inputs, can't you just split the sound ouput from the bb1 mpu and just wire using an rca to 3.5mm cable?
-
I see RCA type inputs, can't you just split the sound ouput from the bb1 mpu and just wire using an rca to 3.5mm cable?
I was told that the harness starts from a 6pin from the amp and splits into 2-4 separate harnesses that need to be connected to different plugs in the machine.. I tried to simply run RCA's and it didn't make a peep...
Somebody must have this chair to verify.., If not, I'm RICH!!! Haha, JK..
-
Matt, I have a install book with color pics etc. Usb's etc are also used, You have bb2 brainbox. I have to leave and will not get back till about 2pm my time. Will get the book out and try to help when I get back and yes it also splits off audio amp in machine.
-
Matt, I have a install book with color pics etc. Usb's etc are also used, You have bb2 brainbox. I have to leave and will not get back till about 2pm my time. Will get the book out and try to help when I get back and yes it also splits off audio amp in machine.
Cool, Thanks... I will still have to track down the harness or at least see one to know whats what.. Chat later
-
Matt, Sent you some info, It should help some.
-
Matt, Sent you some info, It should help some.
Got it.. That must be one confusing harness! Hope I can find one complete..
Thanks!
-
Bump. Still looking for this harne$$! Or even a clear picture of it.
Thanks! :cool_thumb_up:
-
PM Sent
-
Does anyone have pinout info on the WMS amp for the sound chairs with the 8 pin (vs 6 pin) connector and 20 pin (vs 18 pin) connector? I have the amp that has the 6 and the 18 but just purchased one with the 8 pin and 20 pin but cannot find any pinout info to make a harness.