New Life Games LLC

Bill Validators, Currency Acceptors and Printers => JCM WBA 10, 11, 12, 13, 14, 20, 21, 22, and 23 Bill Validators => Topic started by: Cve730 on November 09, 2022, 08:30:31 AM

Title: Dt-104 pinout
Post by: Cve730 on November 09, 2022, 08:30:31 AM

I found a jcm dt-104 programmer that is missing the cable that attaches the validator to the programmer and the power supply. Can someone with a dt-104 share a pic of the pinout of the communication cable and the power supply requirements with me please? 
i have some wba 12 units i would like to get up and running
Thanks

Title: Re: Dt-104 pinout
Post by: Sunrise Side on November 09, 2022, 10:29:18 AM

You will need a 12 volt switching power supply like used on a laptop. you will need the connectors that plug into the power and comm ports on the  DT-104. You will need a connector that connects to the back of the WBA . I will post pictures of the wiring later today.

Title: Re: Dt-104 pinout
Post by: Cve730 on November 09, 2022, 10:40:36 AM

Thanks for the reply i appreciate it, i have a harness i believe to be for the older wba 10 version. i want to try and rewire with a wba 12 end and use that.

Title: Re: Dt-104 pinout
Post by: Badbaud on November 09, 2022, 10:57:48 AM

Here is a picture of all of the cables I use on our DT104.

Title: Re: Dt-104 pinout
Post by: Cve730 on November 09, 2022, 01:41:36 PM

Thanks for the reply, i think the 2 harnesses on the top left of the pic is what im looking for. Anychance u could post a close up pic of the ends of those two so i could try and copy them?

Title: Re: Dt-104 pinout
Post by: Badbaud on November 09, 2022, 03:10:08 PM

Email me and ask for those pictures.

Title: Re: Dt-104 pinout
Post by: Sunrise Side on November 10, 2022, 09:13:58 AM

Harness for DT-104/DT-004 to WBA

Title: Re: Dt-104 pinout
Post by: Cve730 on November 10, 2022, 10:32:47 AM

Thanks for the pics it looks like some of the wires change color by where your tag that says "single wba" anychance i can get one more pic of that are? Thanks I appreciate the help

Title: Re: Dt-104 pinout
Post by: Sunrise Side on November 10, 2022, 06:27:53 PM

The only change is the white wire is connected to the yellow wire because I used parts and pieces of harnesses because I do not know what the plastic connectors are called, I don't know what the wire connectors are called, and I don't have the tools to work with to make all these connectors.  The twisted black and red wires are the 12V and are the bottom 2 Black and Red wires in this picture of the WBA connector.  The Green, Yellow, Orange, Red, Brown are the comm wires.

Title: Re: Dt-104 pinout
Post by: Cve730 on November 11, 2022, 09:05:28 AM

Thank you i got it wired up and its working, now i can start going thru some of these wba's. I appreciate the help

Title: Re: Dt-104 pinout
Post by: Sunrise Side on January 30, 2025, 11:59:04 AM

Alan.  I have a DT-104  and need to make up a harness that connects from the DT-104  to WBA10/11. Would you help me with the the wire position on each end of your harness in your picture here please?

Title: Re: Dt-104 pinout
Post by: Sunrise Side on January 30, 2025, 12:01:06 PM

This harness pinout on both ends please.