New Life Games LLC
**Reel Slots** Gaming Machines => IGT S and S-plus Reel Games => Topic started by: KAM! on December 13, 2022, 11:04:02 AM
-
Hello, I am new here and have jumped into the ownership of Slot Machines. I recently purchased 2 machines, a Double Diamond S-Plus and a Sizzling 7 S-2000.
I think I have been fairly lucky as I have identified and repaired the basics on both machines to the point where they are "functioning" but have a lot of questions I am still seeking!
Today's question and focus is on the S-2000 Sizzling 7 machine, it is a $1.00 machine that uses token coins. The hopper has a broken wiring harness and when it cycles for a payout it produced a CODE 3200 (hopper timed out). I am hoping to find a replacement wiring harness and am wondering are they the same for all hoppers?
I have enclosed pictures of the hopper, broken part, and harness. This is the way I bought the machine. I have also included a picture of the wiring harness hopper for my S-Plus Double Diamond machine (.05 Coins) that shows the part #. I tried swapping the hoppers and cycled the Double 7 machine I got the CODE 3300 (empty hopper) obviously the coins are different and it was empty.
I will hold my other questions for later and I welcome any direction or suggestions on making the proper and correct repairs.
Thanks in advance for your help.
PM's welcome
-
S plus and S2000 hoppers are different but the Sizzling 7 machine pictured is a S plus not a S2000. Looks like you need a hopper optic.
-
You might wanna contact the fella in this link below to see if they have the hopper optics you want for your S+ machine...he's a member here...They're called KLAR...>>>
https://www.ebay.com/itm/334584047617? (https://www.ebay.com/itm/334584047617?)
JIM of Midwest slot parts might have it also...
His shop phone number is listed as...>>> 1-513-984-2201
-
Thank you for your replies. I was able to connect with Jim and also purchased the wiring harness via the eBay link. Thank you again!
-
Don't want to hijack but..
Is the coin out optic pictured HOA6267-004, 379 037 90, 1200 for large coins? I see that this is a $1 machine. My $.25 denomination S+ recently cracked the wire side of the sensor because of a multiple coin jam. It is a HOA6267-1, 379 020 90, 8919. If so, what's the key part number that differentiates the two? I tried googling without any success.
We were able to super-glue it and it works, for now....