New Life Games LLC
**Video Poker, Keno, Slots, 21** Gaming machines => Aristocrat Video Gaming Machines => Topic started by: squizz on October 22, 2014, 04:12:17 AM
-
Hello
Very new to this and first machine repair for me :(
I turn the machine on and the image shown to me is as attached.
I also have metering error.
Anyone know how to fix this :Scratch-Head:
I'm stumped - shrugs
I have a key for the Jackpot
the audit I connected 2 wires that I can close on and off.
Have found a ram clear post, but nothing seemed to work.
If I get to Meter 1 screen
all I see if FFFFFF and FOFFF etc
Press button 1 for fast or slow spin.
that button works but thats as far as it gets.
HeLp :CaptainHappy_worried:
-
Needs a RAM clear, details on how to do it are on this site.
-
I have tried, but cannot seem to get it to clear :(
I only have Jackpot and Audit locks.
no cancel as noted in the doc below.
Is there another doc that I need to follow?
-
Here is what the red buttons do.
-
Thanks for the button file.
I tried again to clear it,
I turn the audit key on, goes to meter 1 board full of FFFFFF 666666687 etc
Then no buttons work within after opening the door.
I close the door and audit and the screen stays in Meter 1 screen - Where I have to turn the machine off and on again
to get to main jumbled screen as above poasted. :(
I'm really lost as to where to start :Scratch-Head:
-
try this and the buttons have to be pressed very hard
-
Hmm
I guess I have to clear the RAM first
But cannot get it to happen.
I have tried audit
then jackpoy key
open door and hold firmly the first 3 red buttons
Nothing shows in screen
except Meter 1 screen with
FFFFFFFF
etc
Tried holding the Mem while booting up
Nothing
:(
-
I've had to try several times before it
would work.
-
Proten
What is the best way to do it ? ( Ram clear )
I can get to Meter 1 page, but collect button, reserve or any other will not page thur other meter pages. :Scratch-Head:
All I can get to work is the slow and fast spin in that screen menu.
I'm guessing that I have to clear the ram
then clear meter error etc
So what process do you suggest?
I feel like I'm :banghead:
Also is here a Mk I4 Manual around? I have looked for days and cannot find one
-
You just have to keep trying.
The keys have to be turned and held in the turned
position and then the buttons have to be pushed
all three at the same time.
PM me your email address and Ill email it to you.
-
PMed thanks
-
This may be a NSW or Australian machine.
-
Yes correct
N.s.w machine
Needs clear chips :(
-
Does not need clear chips, No Australian Aristocrats require them,as per Protens advised keep trying mate
-
SS308
I have tried approx 50 times now :(
Have turned both the audit and jackpot keys on.
opened door and held the first 3 buttons down - even have tried to hold them down for a complete minute.
nothing - stays at the meter screen.
-
Try this way
clearing game
clear ram (loc by 2 game chips)
power up game
shut door
turn audit key (get in system)
open door
push 3 buttons (left 3)
turn audit then jackpot key to clear numbers
set options
done
-
No go
Thanks anyway ;)
-
I would say the SRAM or eprom codes gone on it. Do the graphics move at all when you boot it up seen it before on a board once where the eproms were stuffed from age
Cheers
-
what mazwrek said, iv had a 540 do the same thing re burning the game chips fixed it
-
thanks
will give it a go.