New Life Games LLC
**Video Poker, Keno, Slots, 21** Gaming machines => IGT PE and PE Plus Poker Games => Topic started by: Todbedy on May 15, 2024, 06:47:57 AM
-
Hello,
I have a players edge game that plays as it should however the cards displayed are blank (see pic). I'm guessing this is a color issue as the color test pages 14-17 in the self test menu are showing blank (big white squares).
Has anyone dealt with this issue before?
Thanks in advance for any help!
Chris
-
Normally that is caused by a defective, or wrong, CAPX chip or a pin was bent on it when it was installed.
-
Normally that is caused by a defective, or wrong, CAPX chip or a pin was bent on it when it was installed.
I was able to pull the chip and the pins look good. Are these CAPX chips easy to source?
-
Looks like there are two topics for this same issue. I looked at the manual in the file system and this is specifically covered in the instructions. Not sure if my attachments will be legible but it's covered in the manual if you cannot read it here. Looks like jumper E14/E15....IF the issue is IC volume related. You can look at the volume printed on the chip and see if it matches the jumper setting. Based on the other feedback from Jay and Badbaud this is likely a mismatch of CAPX.
Chris
-
Update: She's up and running!!! :applause:
Turns out there is a repair shop only 10 miles from me. The tech hooked up my board and 1 or more of the 7 chips in the set were bad. He did a chip swap, cleared the board and its working great!
Thanks for all the help and advice guy!
Cheers,
Chris