New Life Games LLC
General NLG Chat => General Chat, Slot Shop **Tech Talk** Welcome wagon and other stuff. (Off-Topic Post Welcome) => Topic started by: daryltwigg on May 28, 2015, 06:16:01 PM
-
Hello. I have a Bally Super Continental 891-1 that was used in a Youth Organization for fund raising. The unit has been converted to allow use via a separate remote credit box. Unfortunately, the wires were cut when the machine was removed, and the wires from the remote box do not match the wires from the 891. I have reconeccted the wire to the best of my knowledge, and the remote runs, clicks, etc, but nothing happens in the 891. The tilt light is on, but there seem to be no power to the upper EM units. There is a single relay with a large resistor in the bottom cabinet that buzzes, and the unit shuts down within a few mins. There is no coin apparatus nor a hopper inside the machine. Any help would be appreciated. I will uploads some pictures in a day or two. Thanks again.