New Life Games LLC
**Reel Slots** Gaming Machines => IGT S2000 and Vision Games => Topic started by: 777sizzler on June 22, 2015, 06:50:30 PM
-
This came to be when one of the kits for these was for sale here-which has been sold and there was discussion about the top light bonus bar. I am posting this for Danny-Slottex which was having trouble loading the pics. here. First three pics will be S-2000 version, Last two will be s+ and you can see the diff. in the boards,wiring etc.
-
3rd s-2000 light bar pic.
-
S+ Bonus sizzler light bar pic's
-
Barry Thanks, From what I see I do not think the S+ top light bar can converted to a S2000 !!!
-
I made this up a while back on my S+ light bar. Don't have any info on the S-2000 one.
Of course the voltage is 6V on the S+ verses 12V on the S-2000.
My Bonus Lamp assembly is #75110400 Rev B from an S+ with 9 lamps but uses 7
on this game. The harness is #609-67100 Rev a 07/98.
Wire & pin-out colors in Female Plug; Wire & pin-out colors in Male plug used in S+;
(Progressive plug)
1. Red/Black 1. 2-Red/Black (+VB, 10 V DC)
2. Green/Blue 2. 2-Green/Blue (? Ground?)
3. Blue 3. 2-Blue (7 VAC)
4. Gray/Black 4. Gray/Black (Pay line 6)
5. Gray/Black (suppose to be brown) 5. Gray/Black (Pay line 5), (suppose to be brown)
6. Gray/Red 6. Gray/Red (Pay line 4)
7. Gray/Orange 7. Gray/Orange (Pay line 3)
8. Gray/Yellow 8. Gray/Yellow (Pay line 2)
9. Gray/Green 9. 2-Gray/Green (Pay line 1)
10. Gray/Blue 10. 2-Gray/Blue (Data out)
11. Gray/Purple 11. 2-Gray/Purple (Data Clock)
12. Gray/White 12. Gray White (Data Strobe 2)
13. Blank 13. Gray (Data Strobe 3)
14. Blank 14. Blank
15. Blank 15. Blank
Wire & pin-out colors at Bonus Lamp assembly;
1. Gray/Blue (Data Out)
2. Gray Purple (Data clock)
3. Gray (Data Strobe 3)
4. Red/Black (+VB) logic supply
5. Green/Blue (ground)
6. Blue (7 VAC) lamp supply
-
Ron, if i sent you my Light Bar for the S2000 do you think you might be able to figure out how to convert the S+ bar to work on the S2000 ? I have 3 S+ Bars but only 1 S2000.
Thanks Danny
-
Ron, if i sent you my Light Bar for the S2000 do you think you might be able to figure out how to convert the S+ bar to work on the S2000 ? I have 3 S+ Bars but only 1 S2000.
Thanks Danny
I wish I could but I don't have the right equipment to check the board. This may be the problem on converting to 12V. Of course if you want to sell it I would be your first customer. :yes:
Maybe someone that has the equipment to check or read the components can chime in.
-
Ron , not ready to sell but I am like you hope somebody chimes in !!!!!!!!!!!!!
-
Slottex, after I reviewed the pictures of both circuit boards they are completely different. The S+ has many components
including transistors for each lamp and many EPROMS. S-2000 has very few components. The only thing similar is the lamp holders.
Sorry there is no way the S+ boards could be modified to fit and S-2000.
-
Thought I would revive this older thread as I see the questions coming up again, The S+ Will not work in a S-2000.