New Life Games LLC
**Reel Slots** Gaming Machines => Bally Reel Games => Topic started by: drfreeze1739 on September 15, 2015, 03:39:45 PM
-
Looking for a manual for the bally classic.
i got a bally classic slot machine..
i have 3 diffrent boards for it/ None of them seem to work..
with one board the reels spin and stop. but the reel motor keeps spinning and wont stop.. and when i turn reset it stops..
thats about all it does...
i never messed with one of these machines before..
i have done all the older bally and newer bally but not one of these..
any help or a manual would be good..
i have checked the download site on here but couldnt find one..
will post pics in a min..
-
pics
-
pics
-
https://youtu.be/CT9Cm2IiTrA
-
That controller board is not Bally, it's Jennings 400 series. Your machine must be a hybrid.
Confused as to why the Bally name is on it...
-
Jennings Logic PC Board:
(https://newlifegames.com/nlg/proxy.php?request=http%3A%2F%2Fwww.ramegoom.com%2Fjohn%2Fjennings400%2Flogic_board_top.jpg&hash=a721cf8cfb7d166adb9e6149d38c84280e10bf40)
-
Yea I seen that the boards look like a JennING machine boards.. don't know why.. there is a bally Tage on the side of the machine also.. so I wonder we what board goes in there.. . Need a little help..
-
i have seen a lot of Classics and this one is new to me - some tech must have had a lot of time on his hands.
-
The fact that the reels stop tells me the logic is functional. The reel spin motor is typical of a Jennings machine. And, there is a delay relay that shuts the motor off, so that might be your problem with the reel motor. Look for the relay, or small PC board with TRIACs on it. I have managed to get a few Jennings machines up and running, the biggest problem being the acid leaching damage from the NICAD battery that was soldered on the boards.
I have 24 Jennings 400 machines on pallets, just waiting for the right time to go thru them....soon I keep saying.
-
i got this classic some what to work..
the reels spin and stop now..
when you win some times it will pay out sometimes it wont..
It needs a few lights and some locks and keys..
cleaned it all up. repainted the black on it..
its a 25 cent machine with a 5 cent hopper disk in it..
so when it dose win it wont pay out..
going to see if i have a 25 cent disk arround that will work..
i know i have jenn 400 hoppers not sure if the disk will work in a bally hopper..
-
pic
video of it some what working
https://youtu.be/NsDoqVhc9e0
-
Do you know where i can find one of these boards?
its for a 3 coin
3 line
5 cent machine..
let me know...