New Life Games LLC
**Video Poker, Keno, Slots, 21** Gaming machines => Aristocrat Video Gaming Machines => Topic started by: Mizrachi on October 16, 2015, 01:26:31 AM
-
Hey all,
I just got my first aristocrat machine, Not sure the type and all but I will attach photos. I appreciate any help I can get, Thank you very much.
- I'm trying to change the denomination of my machine from a $0.05 to $0.01.
[size=78%] [/size]
-
You will need set chips to change the denom.
-
What would the set chip be labeled as and where do i place or replace it with?
I appreciate all your help!
-
And that is only one of the reasons I said they suck.
-
The set chips I use are 06.03.04
They go in where the system chips are(U70,U83)
One warning...they are difficult games to set up after you clear them if you dont know what you are doing.
-
Hi,
You need to ram clear, to allow you to make changes. link below on how to do.
http://newlifegames.net/nlg/index.php?topic=4835.0 (http://newlifegames.net/nlg/index.php?topic=4835.0)
-
Hi Inskip,
this is not an Aussie machine, a RAM clear wont work for USA games/software unless they have set/clear chips, set up for NSW (yours ) is a lot easier than US games.
cheers,
Shaun
-
Hi Shaun,
Thanks for the clarification, I learned a bit more about theses machines.
cheers
-
Thank you all so much!!
I was also wondering before I do this procedure (changing denomination from 5¢ to 1¢) if it was possible to still have my coin acceptor for 5¢ and hopper to still pay out nickles? :)