Main battery low/ options verification required

[Tilt]

The options verification message is normal after the machine has gone through a RAM error reset process.  It's letting you know to check all the machine settings to make sure they are correct before putting it back in service. 

I don't know your level of experience working on electronics.  If you can read schematics and have the right equipment to solder/desolder surface mount components then you may be able to fix it yourself.  If not, I recommend sending it off to Lookes or someone who does to have it repaired. 

[Ocitown]

Would it all be possible that somewhere in the settings which by the way is comes up after I do the reset maybe hold the answer to this low battery issue.

Or is the only answer in the main board?

[sixcardmark]

Like Tilt said - NO settings can cause a low battery.  Replace MPU or send it to Lookes to be repaired.