IGT I Game Munster's - lines in display problem

[Tilt]

Hello,     I just installed Munster's simm & eprom kit on an IGT I GAME 3902 board.   The game powers up and plays perfectly even recognizes BV & takes currency.

My problem is that some sections & colors on the screen have been replaced by vertical light lines.       Also,  when I go into payout menu, more the the graphics appear and the funky section is only along the bottom.

Other another 3902 board with Hexbreaker works 100%,  so I don't think it's a monitor issue...     I attached 2 photos of the problem.

Any help would be greatly appreciated.

Thanks

Moe

[Tilt]

« Reply #1 on: February 11, 2012, 09:25:14 PM »

   
Clean/re-seat the CGF Simm installed below the sound card and see if that clears it up.

Tilt

« Reply #2 on: February 11, 2012, 10:46:32 PM »

Thanks for your advice TILT,  but it did not help.. same simptom..   

Mojomoe

« Reply #3 on: February 12, 2012, 10:14:05 AM »

   
Try installing this game on the working 3902 board that has Hexbreaker installed on it and see what that does.

Tilt

« Reply #4 on: February 12, 2012, 02:33:17 PM »

The problem still exists even on another board...  I also tried I dream of Jeannie on the same 3902 it came up with no problems.   Seems like it's an issue on the Munsters set...   

Thanks for the help TILT.

Mojomoe

« Reply #5 on: February 12, 2012, 04:49:34 PM »

   
Yep, that would eliminate the board alright.  I would try to get a new CGF card for that game.  I had one that looks like yours and replacing it fixed it.

Tilt

« Reply #7 on: February 22, 2012, 11:11:32 AM »

Hello All, 

Just wanted to close the loop and post that it was indeed a faulty CGF card.     The amazing 'Jim Masonis' from Golden Gamerooms was able to troublshoot and find the root cause and help me get another CGF card. 

He is without a doubt a great tech and a real pleasure to work with...   

Thanks to all who replied and sent me to Jim!   

Moe