11
IGT Reel Touch Games / Re: Lobstermania gets stuck initializing
« Last post by Stayouttadabunker on Today at 04:54:27 AM »Maybe I can help you a little?
We need to determine if the power supply is working right or not.
Grab your multimeter, open the door and turn on the power switch.
Let's check for power to the backplane board.
Way on the bottom right-hand side of the backplane, you can see that there's a white Molex connector?
On the top two pins of it, there's a single black wire going into it.
Stick the red probe of your multimeter into that pin with the black wire and touch your black probe onto the metal floor of the cabinet.
Tell us what voltage you get.
We need to determine if the power supply is working right or not.
Grab your multimeter, open the door and turn on the power switch.
Let's check for power to the backplane board.
Way on the bottom right-hand side of the backplane, you can see that there's a white Molex connector?
On the top two pins of it, there's a single black wire going into it.
Stick the red probe of your multimeter into that pin with the black wire and touch your black probe onto the metal floor of the cabinet.
Tell us what voltage you get.