11
IGT S2000 and Vision Games / Re: BAD PCB Board S2000 QUESTION
« Last post by lookes on Today at 11:34:45 AM »The 501A board will work fine with your chips. If you have a multimedia (sound) board on it it will be very noisy.
Welcome to the NewLifeGames.com message forum!
|
11
IGT S2000 and Vision Games / Re: BAD PCB Board S2000 QUESTION« Last post by lookes on Today at 11:34:45 AM »The 501A board will work fine with your chips. If you have a multimedia (sound) board on it it will be very noisy.
12
Bally Alpha Reel Games / Re: S9000 Issues« Last post by 3AsAmusement on Today at 11:28:43 AM »Because my post count is so low, I'm not able to reach out to RB. Is there a special place I can obtain the card(s) I'll need? I've searched everywhere I can think of and have had no luck.
13
NLG Classified ads and White Sheet - PLEASE READ DESCRIPTION BEFORE POSTING! / Bally Alpha 2 Pro v27/27 with ArgOS Huff and More Puff« Last post by Slots4Texas on Today at 11:13:18 AM »Pick up from Stafford TX
Asking $4500 Call or text 979-383-4210 14
NLG Classified ads and White Sheet - PLEASE READ DESCRIPTION BEFORE POSTING! / Everi HDX upright with The Three Little Pigs« Last post by Slots4Texas on Today at 11:08:30 AM »For shipping contact us with city state and zip code
Pick up from Stafford TX Asking $2000 Call or text 979-383-4210 15
NLG Classified ads and White Sheet - PLEASE READ DESCRIPTION BEFORE POSTING! / Konami Concerto Upright with Selexion« Last post by Slots4Texas on Today at 10:22:32 AM »Pick up from Stafford TX
Asking $3500 Call or text 979-383-4210 16
IGT S2000 and Vision Games / BAD PCB Board S2000 QUESTION« Last post by Akriegs on Today at 09:40:28 AM »My S2000 is not working. It powers up and i get nothing on the VCD display. I remove the board and i hear the bill cycle and it says netplex is down. i but the board back in and i get nothing not even bill cycle. There is no Green Varta battery and the little battery has about 2.6 volts. I replaced the board with a know broken board and it boots up , gives the ram error , reset button 4 times and i get to hold reset 2/3 seconds. please close door. door wont close error wont go away. I know the board is bad so i know i should get this error. These are all 1952-0 1952-2 boards. i now have 3 dead 502 boards but i do have what i think is a working board. however this board is p/n 75510501 Rev A. can i put the chips into this board and try to boot? Will it break or ruin anything?
17
WMS Williams Video / Re: Going from CPU-NTX2 in BB2 to a CPU-NTX« Last post by Ash100 on Today at 09:26:39 AM »Another update.
Changed the Battery in the TSE TSE Box again and it now fully shows the Love Boat Image on the upper LCD. Perfect, that's out of the way. I still don't have an image on my lower LCD. I tried a second CPU and it's not displaying anything either. I bypassed the LCD and hooked up a Computer Monitor, still no signal with either of my CPUs. I checked the VGA Cable by using it from the TSE to the Computer Monitor, and it works. Shows the Love Boat image. So, now I'm guessing I've got 2 bad CPUs, which both were shipped to me as "Tested". I guess I'll order a 3rd and 4th CPU and send the other 2 back to them for testing/repair. I'm, so close. Lol. Curtis ash100 18
IGT S2000 and Vision Games / Re: S2000 Double Diamond« Last post by shortrackskater on Today at 09:07:15 AM »To avoid annoying sideways photos, please EDIT them in you phone by just rotating them 360 degrees. (or 45 and back I think)
When you orient the phone horizontally, it saves that perspective which causes the "sideways-ness." Otherwise you're friendly Admin with OCD will spend his entire day flipping pictures! 19
IGT Reel Touch Games / Re: Lobstermania gets stuck initializing« Last post by kmarrocco on Today at 08:41:36 AM »I tried the double diamond MPU....this time with the bill validator and cash can installed and was able to get the reels to spin. It seems there is a problem with my original MPU. I will have to reach out to member Lookes to see if repairing my MPU is an option. Thanks for the advice, this is progress.
20
IGT S2000 and Vision Games / Re: S2000 Double Diamond« Last post by kmarrocco on Today at 08:38:58 AM »Thank you both for the help and ideas. It is an SC6602 based on the front label. The unit does not cycle. I will have to read up on how to test this out later this evening. I will also have to read up on how to use auto config to initialize it.
|
Cell Phone and Pad Mode imode wap wap2 |
NLG Archives Archives @ newlifegames.net Wayback Machine |
Contact Us NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442 |