1
IGT Reel Touch Games / Re: Lobstermania gets stuck initializing
« Last post by kmarrocco on Today at 07:41:05 PM »I have reseated the power supply behind the reels and also the chips on the mpu. There are still no lights on the MPU.
Welcome to the NewLifeGames.com message forum!
|
1
IGT Reel Touch Games / Re: Lobstermania gets stuck initializing« Last post by kmarrocco on Today at 07:41:05 PM »I have reseated the power supply behind the reels and also the chips on the mpu. There are still no lights on the MPU.
2
Coin Comparitors and Other Coin acceptors / Re: IGT Double diamond S Plus, coin comparison issue!« Last post by Stayouttadabunker on Today at 07:28:28 PM »You took the coin-in optics apart but didn't show us a picture of the black plastic encoder guide?
3
Coin Comparitors and Other Coin acceptors / Re: IGT Double diamond S Plus, coin comparison issue!« Last post by David Walz on Today at 07:23:51 PM »There is no model number that will tell you what it was.Thanks. 4
IGT S2000 and Vision Games / S2000 Double Diamond« Last post by kmarrocco on Today at 07:20:53 PM »I recently picked up a Double Diamond Machine (s2000). I was able to use clear and key chips to get the machine setup. However, the machine doesn't seem to take money in the bill acceptor. I noticed there is a fast lower candle flashing but I think that is just because the door was open. Any ideas on how to test the bill acceptor? Thanks!
5
IGT S2000 and Vision Games / Re: Igt Game Identification« Last post by Tilt on Today at 06:24:58 PM »There are some wiring diagrams and schematics for S+ machines here in the file section, but you have to be a contributing member to access it.
6
WMS Williams Video / Does anyone repair/refurbish NXT-2 mpu's?« Last post by lazzerjett on Today at 06:18:54 PM »Hello, does anyone repair/refurbish the NXT-2 MPU's in the BB2 machines? I hate to have to purchase them if someone can reasonably go through and repair mine. Some have issues with the CF holders and need to have them replaced, others I'm not sure what is wrong. If you do then please let me know what the price range is for doing it.
Thanks 7
NLG Classified ads and White Sheet - PLEASE READ DESCRIPTION BEFORE POSTING! / Re: WTS Bally 6000 machines and parts« Last post by Sunrise Side on Today at 06:04:40 PM »Contact NLG member pbwizard25. He is interested.
8
IGT S2000 and Vision Games / Re: S2000 - Install a FutureLogic GEN1 printer« Last post by Faircloth on Today at 05:33:21 PM »I am planning to install a FutureLogic Gen 1 printer in the top box like the original post has done. My question is about the interface cable he used to go from the printers provided cable (8 pin netplex and three pin power) to the Ten pin netplex and two pin power on the board in the back of the top box. I have looked but find no where that sells this. I can fab it if I knew the pin to pin wiring.
9
IGT S and S-plus Reel Games / Re: IGT Double diamond S Plus, RESTORATION« Last post by sixcardmark on Today at 05:20:41 PM »The backside of that coin head looks pretty big, I believe it was still a dollar denom??
10
Coin Comparitors and Other Coin acceptors / Re: IGT Double diamond S Plus, coin comparison issue!« Last post by jay on Today at 05:16:26 PM »There is no model number that will tell you what it was.
It may have also changed during its service life. Coin in is based on coin head. (External metal entry). Coin comparitor cc-16 or cc-33. The 16 is for small denominations up to a 1/2 dollar. The 33 is for large denominations from $1 up to $100 tokens. Both work the same way and are interchangeable. They compare the metal content in the sample coin with what is dropped in. I run mine off tokens that are in similar size to a quarter. Next is the ABC optics it’s the small board below the comparitor. This makes sure the coin is falling at the right speed and the right direction to prevent cheating. The optic board has a spacer guide that makes sure the coin is sensed right. Lastly there is the hopper. It would have a wheel in it to be able to eject a certain size of coin. As that is missing You can set up the machine for the denomination of your choice. Generally speaking if you had a cc-33 in the machine it’s likely a dollar slot or possibly a high denomination token. The latter being quite rare. So take a Susan B coin and pass it through the coin head - if it passes your 98% sure it was a dollar slot. The matching spacer in the optic is your final 2% assurance if that means anything. |
Cell Phone and Pad Mode imode wap wap2 |
NLG Archives Archives @ newlifegames.net Wayback Machine |
Contact Us NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442 |